R GRADES

MONOCELL® 300 is a fast molding EPS grade, which can be produced in density ranges between 10 kg/m3 – 20 kg/m3 and is suitable for high quality block molding.

Technical Data Sheet

MONOCELL® 200L is a fast molding EPS grade, which can be produced in density ranges between 12 kg/m3 – 25 kg/m3 and is suitable for high quality block molding.

Technical Data Sheet

MONOCELL® 200 is a fast molding EPS grade, which can be produced in density ranges between 13 kg/m3 – 30 kg/m3 and is suitable for high quality block molding and shape molding with a section thickness of 20 mm and higher, ensuring rapid molding with short cycle time.

Technical Data Sheet

MONOCELL®  100BL is a fast molding EPS grade, which can be produced in density ranges between 19 kg/m3 – 40 kg/m3 and is suitable for high quality block molding and shape molding with a section thickness of 10 mm and higher, ensuring rapid molding with short cycle time.

Technical Data Sheet

MONOCELL® 100 is a fast molding EPS grade, which can be produced in density ranges between 18 kg/m3 – 40 kg/m3 and is suitable for high quality block molding and shape molding with a section thickness of 10 mm and higher, ensuring rapid molding with short cycle time.

Technical Data Sheet

MONOCELL® 50 is a fast molding EPS grade, which can be produced in density ranges between 23 kg/m3 – 60 kg/m3 and is suitable for shape molding with a section thickness of 10 mm and lower, ensuring rapid molding with short cycle time.

Technical Data Sheet

Safety Data Sheet Monocell® R

Array